Differences

This shows you the differences between two versions of the page.

--- tools:eyetracking:prismaeyelink [2024/10/14 17:29] – will
+++ tools:eyetracking:prismaeyelink [2025/08/27 13:12] (current) – hardware log will
@@ Line 1: / Line 1: @@
-====== Prisma EyeLink ======
+====== Prisma SSR EyeLink ======
   * The EyeLink Tray Mounted Camera needs to be placed before the study.
@@ Line 6: / Line 6: @@
 Both of these are stored in the Prisma one scan room closet.
+== Hardware log ==
+  * 2025-08-26 - P2 mirror fell out! scuffed
 == EyeLink SetUp - Prisma 2 ==
@@ Line 12: / Line 16: @@
   - Ensure EyeLink Host PC is turned on
   - Ensure monitor and keyboard are switched to show the EyeLink computer (option #2)
-  - Open the ''Manually_Set_IP.txt'' file on the desktop (for  IP address reference later)
+  - Open the ''Manually_Set_IP.txt'' file on the task pc desktop (for  IP address reference later)
   - Adjust Windows IP address settings
      - Click on the **control panel**
@@ Line 41: / Line 45: @@
   - confirm camera is in focus and thresholds are reasonable
     - if pupil thresholding cannot be established with value above 65, the IR is likely not hitting the eye.
+== Clean up ==
+  - **RESET THE IP ADDRESS BACK TO UPMC**
+    - follow the same control panel -> network properties -> adapter settings  as above but use <code>10.48.88.???</code>
+  - remove the ethernet coord from the task computer (back to disconnected like before)
+  - Gentle reminder to switch back eyetracking monitor and keyboard are switched back to show original screen (option #1)
+  - save the (hopefully) amazing ET data then LogOff of Luna on EPrime